Lids for DeskNano x300
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the 1.2L 3D printed case for ASRock a300 and x300 mini pc.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 847
- Wydruki
- 1
- Wyświetlenia
- 3064
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Lids for DeskNano x300. Supports pretty much any cooler.
Cutout and Mesh styles.
Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with adjusting the infill pattern, infill angles, and density to get the mesh to your liking. For an impressive finish, I suggest printing Mesh style lids inverted on a clean glass bed so the surface texture has a glossy mirror finish.
Explicitly* supported CPU coolers:
- Noctua L9A (92mm and 120mm)
- Wraith Stealth
- AXP-90
- NH D-15
*These are just the ones with explicit support. Many other coolers are most likely implicitly supported by one of the existing lid styles
------------------------------------
1.2L 3D printed case for ASRock a300 and x300 mini pc.
For more info & instructions see the DIY guide on this page:
https://smallformfactor.net/forum/threads/desknano-x300-a-1-2l-replacement-for-the-deskmini-a300-x300.17605/