Lids for DeskNano x300
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.44 – €4.20 net (excluding VAT)
For file: Noctua L9a (120mm swap) 3dMesh .6 nozzle.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.82 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 3 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For the 1.2L 3D printed case for ASRock a300 and x300 mini pc.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 848
- Makes
- 1
- Views
- 3,067
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Lids for DeskNano x300. Supports pretty much any cooler.
Cutout and Mesh styles.
Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with adjusting the infill pattern, infill angles, and density to get the mesh to your liking. For an impressive finish, I suggest printing Mesh style lids inverted on a clean glass bed so the surface texture has a glossy mirror finish.
Explicitly* supported CPU coolers:
- Noctua L9A (92mm and 120mm)
- Wraith Stealth
- AXP-90
- NH D-15
*These are just the ones with explicit support. Many other coolers are most likely implicitly supported by one of the existing lid styles
------------------------------------
1.2L 3D printed case for ASRock a300 and x300 mini pc.
For more info & instructions see the DIY guide on this page:
https://smallformfactor.net/forum/threads/desknano-x300-a-1-2l-replacement-for-the-deskmini-a300-x300.17605/