1 / 10
Edifier 1280DB Speaker Monitor Arm Mount — zdjęcie 1
1 / 10

Edifier 1280DB Speaker Monitor Arm Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a custom mount to attach Edifier 1280DB speakers to a HUANUO monitor arm

Ocena
0 / 5
Polubienia
14
Pobrania
37
Wydruki
0
Wyświetlenia
1257
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
GNU General Public License v3.0

This is a custom bracket I made for mounting the active side of the Edifier 1280DBs' to a HUANUO monitor arm.

Monitor arm link: https://a.co/5f6cjKn

Speaker link: https://a.co/g4CNhMX

Print Settings:

  • 6 walls
  • Infill: cubic subdivision @ 50%
  • I printed with eSun PLA+ but any decent PLA/PLA+/PETG will do

Tools needed:

  1. 5/64 drill bit + drill
  2. Screwdriver
  3. M5 Allen key
  4. Needle nose plyers

Parts needed:

Active side:

  1. 8x #6 x 1" Pan Phillips Sheet Metal Screws (https://bit.ly/3PmqhWM)
  2. 2x M5 x 20mm bolts + nuts
  3. 1x Monitor arm adapter plate (taken from VESA mount)

Passive side:

  1. 4x #6 x 1" (same type as active side)
  2. 13mm spacers
  3. Monitor arm VESA mount

Steps to assemble:

Active side:

  1. Use the Allen key and needle nose plyers to secure the adapter plate to the 3D printed bracket with the M5 bolts
  2. Unscrew the 8 perimeter screws from the speaker backplate
  3. Place printed bracket over the back plate and screw in the 8 #6x1" screws around the perimeter by hand (do not over tighten)

Passive side:

  1. Use the VESA mount bracket to mark holes in the back of the speaker
  2. Drill marks with 5/64 drill bit
  3. Attach VESA bracket using spacers and the 4 #6 x 1" screws

NOTES:

  • This bracket (when mounted to the monitor arm) will block the coaxial and optical inputs
  • This bracket (when mounted to the monitor arm) will slightly block the on/off switch and needs something like a pencil to flip the switch
  • This bracket (when mounted to the monitor arm) will slightly block the L of input 2, but it can be squeezed in

The Fusion 360 files will be included so you can make modifications as necessary

Tagi