1 / 3
Knockbox - for Coffee and Espresso grounds
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This knockbox is extra sturdy for all your coffe grounds knocking needs. No Support needed!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Print this knockbox in any material you want, I chose PETG.
No Supports needed!
I added a colour accent by layer-based colour change.
I used a 20mm wooden dowel. I measured it with calipers, came out at 19.7mm, which I designed for. You can pop the dowel in and out for cleaning.
There are endstops which also print without supports, a sacrificial layer needs to be punched through when using wood screws during assembly. I added an assembly stl for reference, as well as STEP and inventor ipt/iam files.