1 / 3
Knockbox - for Coffee and Espresso grounds
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This knockbox is extra sturdy for all your coffe grounds knocking needs. No Support needed!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Print this knockbox in any material you want, I chose PETG.
No Supports needed!
I added a colour accent by layer-based colour change.
I used a 20mm wooden dowel. I measured it with calipers, came out at 19.7mm, which I designed for. You can pop the dowel in and out for cleaning.
There are endstops which also print without supports, a sacrificial layer needs to be punched through when using wood screws during assembly. I added an assembly stl for reference, as well as STEP and inventor ipt/iam files.