Screw for fan covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short screw for mounting fan covers on 120mm fans etc.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 892
- Wydruki
- 0
- Wyświetlenia
- 2139
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Screw for mounting flat fan covers on 92mm fans etc. Tested with Noctua NF-A9x14.
Screw thread width is approx 4.8 mm.
Screw lenght is approx 13.5 mm.
It's more of a press fit rather than a screw, but it gets the job done where little to no force will be applied to it.
I would not recommend using this for mounting a fan to a computer etc where the screw would hold the fan to whatever needs cooling. It was mainly designed to hold fan shrouds and covers.
Printed with head facing down, no supports needed.
Tested printing at layer hight 0.12 mm for the details on the threads.