Salomon Symbio Ski Boot Heel & Toe Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement heel and toe plates for the Salomon Symbio Ski boots. Printed in PETG, TPU would be best, that's what was…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 860
- Wydruki
- 3
- Wyświetlenia
- 4144
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Replacement heel and toe plates for the Salomon Symbio Ski boots.
Printed in PETG, TPU would be best, that's what was originally used.
These are dimensionally far more accurate than what I could find on here.
Replaces parts:
Heel Plate part number: 487450
Toe Plate part number: 377676
See print settings.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.16
Infill:
15%
Filament: Hatchbox PETG Black
Notes:
Print these with the bottom face of the plate (the face that touches the ground) turned upright, so the entire part is floating on supports. To do this, place the part with this desired face "flat on buildplate", then manually rotate the model 180 degrees. This way the face you walk on has a perfect surface finish.
Then chisel out the supports from the internal geometry. Tada!Category: Sport & Outdoors