1 / 1
Filament Guide for My Elegoo Neptune 2S Z-Axis Cover — zdjęcie 1

Filament Guide for My Elegoo Neptune 2S Z-Axis Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This filament guide can help quiet squeaky filament detectors. It is designed to be used together with my Z-Axis Cover

Ocena
0 / 5
Polubienia
32
Pobrania
162
Wydruki
1
Wyświetlenia
1181
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This filament guide was made by request for use with my Z-Axis cover found here: https://www.printables.com/model/219959-z-axis-cable-management-cover-for-elegoo-neptune-2

This was made by request from someone who liked the Z-Axis cover, hopefully other can enjoy it too!

The print is simple, Part A needs support but Part B I printed without it.

Cura Settings:

0.12mm Layer Height (there is a very tiny imperfection above 0.12 but it's probably fine)

0.38mm Line Width

2 Walls (3 might get rid of tiny infill) 

20-25% Infill

Support set to 30% Grid for Part A (or give your own settings a try)

 

The video shows alignment if you are going to drill holes in a previously printed cover:

Tagi