1 / 1
Filament Guide for My Elegoo Neptune 2S Z-Axis Cover — image 1

Filament Guide for My Elegoo Neptune 2S Z-Axis Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This filament guide can help quiet squeaky filament detectors. It is designed to be used together with my Z-Axis Cover

Rating
0 / 5
Likes
32
Downloads
162
Makes
1
Views
1,181
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This filament guide was made by request for use with my Z-Axis cover found here: https://www.printables.com/model/219959-z-axis-cable-management-cover-for-elegoo-neptune-2

This was made by request from someone who liked the Z-Axis cover, hopefully other can enjoy it too!

The print is simple, Part A needs support but Part B I printed without it.

Cura Settings:

0.12mm Layer Height (there is a very tiny imperfection above 0.12 but it's probably fine)

0.38mm Line Width

2 Walls (3 might get rid of tiny infill) 

20-25% Infill

Support set to 30% Grid for Part A (or give your own settings a try)

 

The video shows alignment if you are going to drill holes in a previously printed cover:

Tags