Sony E-Mount to Mamiya Press System adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use Mamiya Press lenses on a camera that uses the Sony E-Mount.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 295
- Wydruki
- 0
- Wyświetlenia
- 2327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Made using my parametric camera lens connectors.
I've tested this design with the 50mm f/6.3 and 250mm f/5 lenses. The taper in the design is 45 degrees, so you should be able to print with minimal supports with the Mamiya Press side down.
There are currently no locking mechanisms on either side of the adapter, but I've included the Fusion 360 *.f3z file to make it easy to remix this project.
As far as I can tell, this is the first open-source design for the Mamiya Press System. Please remix this to make it better and help make more open-source Mamiya Press gear!