Raspberry Pi 3B SKR Mini E3 Stacked Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to stack a Raspberry Pi 3B and a SKR Mini E3 on top of each other.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mount to stack a Raspberry Pi 3B and a SKR Mini E3 on top of each other.
The design is based on the mounts for Voron 0.1.
To mount it, you also need a fitting Raspberry Pi 3B Mount. I designed it to stack the SKR on top of the Pi. It should work the other way around, but i haven't tried that. Double check the orientation of the parts.
You need some M2 and M3 screws.
Designed for printing with ABS. If you use PETG or PLA you should scale to 100,5%.
For easier printing you should cut the model with PrusaSlicer as shown in the picture. You can then scale the four standoffs to fit your specific needs (e.g. space for cable management).