Modular magnetic DnD figure – Mage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable model of a Mage. Or a king. It’s up to you. His body parts are completely modular, featuring magnet slots.
- Ocena
- 0 / 5
- Polubienia
- 249
- Pobrania
- 464
- Wydruki
- 0
- Wyświetlenia
- 5239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — NoDerivatives
All pieces of the model are ready to be 3D printed on an SLA printer. They are prepared for inserting cylindrical magnets.
Magnets we use:
Diameter 2 mm
Height 0.90 mm
SIZE
At 100% scale the mage’s dimensions are approximately:
Width: 35 mm
Height: 40 mm
Base diameter: 25mm
Neck diameter: 3.10 mm
Lower body diameter: 6.30 mm
You can scale the model as you wish.
3D PRINTING SETTINGS
We recommend printing with an SLA printer (0.025mm layer height) but you can print it at a larger scale on FDM printer for which we recommend these settings:
- Layer height 0.1 mm
- Infill 15%
- Supports 45°For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
ASSEMBLY
The holes in the models are prepared for inserting magnets (2mm diameter, 0.90 mm high)
Need to cut your own figures? And prepare them for inserting magnets? We made a manual on that! (PDF) and also a Youtube Tutorial.