Makita 7.2V Screwdrivers TD022D Holder for Skadis (SKÅDIS) Pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
6,39 € – 7,81 € netto (bez VAT)
Dla pliku: Makita holder_8h12m_0.20mm_200C_PLA_ENDER3V2.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 7,10 € netto (środek widełek).
- Masa podana przez autora
- 66 g
- Czas druku podany przez autora
- 8,2 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Makita TD022D holder for skadis, maybe also suitable for DF012D.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
* Perpendicular to the Pegboard for easy access and reduced space usage
* Clamp Bracket design to prevent it from falling
* Strengthened Load-bearing capacity
Please glue the parts.
*"kitbox holder.3mf" is the holder for the toolbox*
Slicer: PrusaSlicer
Total printing time is about 8 hours, weight 67g.
If you use other slicer software, in order to avoid the supports printed to the inside, you need to set Variable layer height: 0.12 for two arc areas(see pics), 0.2 elsewhere