Antenna Guy Insulator (Guy wire strain insulator)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 506
- Wydruki
- 6
- Wyświetlenia
- 1785
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item. Designed with 10mm hole for your line or wire. Easy to scale to whatever size desired. I like 100% and 80% for my needs. If you need larger, scale up.
Print in PETG for durable outdoor use. Do not recommend PLA or ABS.
This is specifically designed to work in tension, with the center under compression as depicted here.
Designed in Fusion 360.
73!
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Resolution: .30
Infill: 50% rectilinear
Filament: Prusament (any) PETG Black preferred for UV resistance
Notes:
Prints standing on end, no support needed.
.30 layer height for speed and filament strength.
3 perimeters; 4 top, 3 bottom layers.
Overview and Background
In my journey to design an insulator for myself, I learned that the subject of insulators is
quite a bit more interesting and considerably more involved than I ever thought it would be.
I put together a PowerPoint presentation with some of what I learned for my local radio club, and also uploaded with my Antenna End Insulator for your interest.
Related Designs
See also: Antenna End Insulator.
See also: Wire Clamp for 14 gauge Antenna Wire.