1 / 1
CR10/CR10s Low Profile Z Motor Mount (Should also fit pro and v2/v3) — zdjęcie 1

CR10/CR10s Low Profile Z Motor Mount (Should also fit pro and v2/v3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Low profile Z motor mount to allow the lower nozzle positions. Utilises existing mounts on uprights and t-slot on bottom

Ocena
0 / 5
Polubienia
8
Pobrania
85
Wydruki
1
Wyświetlenia
740
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

After switching to BMG extruder + e3d v6 direct drive, I couldn't get the nozzle low enough without running into the default z motor mounts. This low profile design allows for lower x carriage position and holds the motor more securely and squarely than the original design. 

Utilises the default screws mounting plate screws plus two m4 bolts + T-slot nuts and two additional m3 screws. Assembly should be self explanatory. 

The model should work for the right hand mount (from front of printer), utilise the mirror function in your slicer to create the left hand side motor mount.

Tagi