Front Signal Plug/Plate for the Honda Navi 110
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple plug for the front signal mount holes when replacing the stock signal assemblies.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1022
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a simple plug/plate for the Honda Navi front signals when replacing the OEM assembly with an LED. This fits a pretty standard 9.5mm diameter mounting bolt. This does still require a >30mm washer on the inside to keep the plate fixed; however, I was able to flip the existing OEM washer around and reuse it.
Printing
I printed mine at 0.2mm layer height with gyroid infill at 20%. There is not much stress on this part, so it seems pretty solid at this infill. Printing time was a little over an hour for both.