1 / 2
Front Signal Plug/Plate for the Honda Navi 110
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple plug for the front signal mount holes when replacing the stock signal assemblies.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 151
- Makes
- 0
- Views
- 1,024
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a simple plug/plate for the Honda Navi front signals when replacing the OEM assembly with an LED. This fits a pretty standard 9.5mm diameter mounting bolt. This does still require a >30mm washer on the inside to keep the plate fixed; however, I was able to flip the existing OEM washer around and reuse it.
Printing
I printed mine at 0.2mm layer height with gyroid infill at 20%. There is not much stress on this part, so it seems pretty solid at this infill. Printing time was a little over an hour for both.