MagSafe MacBook Continuity Camera iPhone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MagSafe version of my previous Non-MagSafe Continuity Camera (Remix of sumit_basra)
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 979
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of a Continuity Camera. This one will only work with iPhones that have MagSafe (you will also need a MagSafe charger. If you don’t have one, check out my other Non-MagSafe Continuity Camera).
Note: There should be a small gap between the MacBook screen and the print, preventing scratches or other damage. To fill this gap I would use something soft like a little peace of microfiber cloth, paper, or even a scrap peace of TPU.
If you have a MacBook Air, I recommend printing the version with the clip (Says “with clip” on file) since a MacBook Air screen is thinner and slightly tapered. This clip model just needs a pen spring at least 1.5 cm long.