Pegboard battery dispensers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery storage and dispensing made easy, models for common and uncommon sizes included.
- Ocena
- 4,25 / 5
- Polubienia
- 119
- Pobrania
- 599
- Wydruki
- 7
- Wyświetlenia
- 2767
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these battery dispensers to mount on pegboard with holes spaced 25.4mm / 1 inch on center. Each holds many cells, is loaded from the top and dispenses from the bottom front with plenty of room to grab batteries. They're fun to load as the cells roll and slide into place.
Containers print on their side with supports required for the pegs. Depending on your printer's tune you may or may not need some supports inside the containers as well. Cheers and happy making!
Edit 2024/05/30: added a 21700 battery holder.