Mueslispool - A Filament Spool Roller/Holder for Kigima Dry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you can afford the third ball bearing I would recommend the new design, the spool rolls more stable on the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you can afford the third ball bearing I would recommend the new design, the spool rolls more stable on the holder.: https://www.thingiverse.com/thing:4621988
I love the Dry-Box found in this thing: https://www.thingiverse.com/thing:3447986
But i hate making new Spool Hubs for every new Filament: Why does all Brands need to have a different diameter?
So i decided to make a Spool Roller which fits in the Box. You need 2x 608 Ball Bearing.
Printed in PLA on my Ender 3, sliced with Cura in 0,28 all parts snap tight, so i didn’t have to clue anything.
Depending on the Design with only Bearings in the center, the Spool can wiggle a bit. But within my tests it doesn’t matter.
I think this Filament Pass-Through is very suitable: https://www.thingiverse.com/thing:3024407
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,28
Infill:
20%
Filament: N/A PLA black
Category: 3D Printer Accessories