1 / 2
Phone Car Vent Holder to Tripod Mount — zdjęcie 1
1 / 2

Phone Car Vent Holder to Tripod Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Updated! This version doesn't need glue. Crude-but-did-the-job tripod socket based on a cheap surplus car vent phone…

Ocena
0 / 5
Polubienia
22
Pobrania
88
Wydruki
0
Wyświetlenia
2380
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Updated! This version doesn't need glue.

Crude-but-did-the-job tripod socket based on a cheap surplus car vent phone mount.

You will need:

  • a swivel / ball joint car vent phone adapter. I picked up an "Aduro Products Swivel Clip Luxe" for about $7 from Princess Auto
  • a ¼" – 20 4-lobed T-nut

The mount I used had a ball joint 16.9 mm in diameter. I don't know if this is universal or specific to this model.

Further update: another surplus vent mount I bought had exactly the same size of ball joint, so maybe a 16.9 mm / ⅔" ball joint is a thing.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.15 mm

Infill:

40%

Filament: Prusament PLA Grey

Category: Mobile Phone

Tagi