Simple kashaka half-shell (customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Given that there aren't too many snuffbox trees growing in Canada, I had to improvise when trying kashakas. You're…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 699
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Given that there aren't too many snuffbox trees growing in Canada, I had to improvise when trying kashakas. You're probably better off buying the real thing.
Pick the diameter to suit your hand size in Customizer. Smaller might be better. Make sure that the central hole is just big enough to let the string pass through, but not allow the stop knot to pass through. The standard wall thickness may be too heavy, but should print on most machines.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
15 %
Filament: eSun PLA+ Light Blue
Notes:
!!! You will need to print four (4) of these to make one set !!!
Some light internal support may be needed to help the shell keep its shape.Post-Printing
Find a suitable shaker fill material. I tried kiln-dried barley with minor success.
Make sure the edges are clean and flat, as you will be gluing them together.
Fill one half as full as you can with shaker fill, then glue the other half on top.
Once the glue has dried, thread string through the holes, tie off one end, then measure the right length to go round your hand before knotting the string and trimming it.
Category: Music