Sock Blocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sock Blocker with replaceable tip for adjusting size
- Ocena
- 5 / 5
- Polubienia
- 165
- Pobrania
- 1823
- Wydruki
- 11
- Wyświetlenia
- 12 287
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: I created the Sock Blocker V2, an improved version of this model. If you have not printed any parts yet, I suggest to start with the newer model. The two versions are NOT compatible.
The Sock Blocker has a replaceable tip for adjusting the size. The tip is attached by a snapping mechanism that can be released by hand. There are versions for EU sizes 37-38, 38-39, 39-40, 41-42, 43-44, and 45-46.
The main part can be printed on a 25 x 21 cm area (Prusa i3) when rotated by 5°. The snapping mechanism was designed for a layer height of 0.2 mm, it may not work properly when printing with a different layer height.
Suggested equipment, material, and settings
- Nozzle: 0.4 mm
- Material: PLA
- Layer height: 0.2 mm
- Infill density: 15%
- Different color for last two layers (for readability of numbers)
Printer used for creating this model: Prusa i3 MK3S