Sock Blocker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sock Blocker with replaceable tip for adjusting size
- Rating
- 5 / 5
- Likes
- 165
- Downloads
- 1,823
- Makes
- 11
- Views
- 12,287
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: I created the Sock Blocker V2, an improved version of this model. If you have not printed any parts yet, I suggest to start with the newer model. The two versions are NOT compatible.
The Sock Blocker has a replaceable tip for adjusting the size. The tip is attached by a snapping mechanism that can be released by hand. There are versions for EU sizes 37-38, 38-39, 39-40, 41-42, 43-44, and 45-46.
The main part can be printed on a 25 x 21 cm area (Prusa i3) when rotated by 5°. The snapping mechanism was designed for a layer height of 0.2 mm, it may not work properly when printing with a different layer height.
Suggested equipment, material, and settings
- Nozzle: 0.4 mm
- Material: PLA
- Layer height: 0.2 mm
- Infill density: 15%
- Different color for last two layers (for readability of numbers)
Printer used for creating this model: Prusa i3 MK3S