Voron 2.4 X Carriage Frame Square Nut Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts at the bottom of the X carriage frame kept being pulled out so I replaced them with square nuts. Problem solved.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 338
- Wydruki
- 4
- Wyświetlenia
- 3476
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
There is no doubt the Voron 2.4 is an impressive 3D printer. It does have its shortcomings though - for some reason, it heavily relies on heat inserts. This is a problem particularly with inserts mounted and ‘loaded’ from the same side, in which case they're being pulled out due to various forces at play.
This issue is most prominent on the X carriage parts. I've hade those two heat inserts at the bottom pulling out so often that I just did a quick mod to use classic square nuts instead - easy enough to get and install and they just stay in place…
NOTE: This mod is based on STEP files supplied with RC1 release of the Stealthburner hotend, which you can find on https://github.com/VoronDesign/Voron-Stealthburner.