BMG Mount for Ender 3 V2 with V6 Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cheap and easy way to run a BMG on the Ender 3 V2 with a V6 Hotend
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 1293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This custom adapter/mount has been made for the Ender 3 V2.
However it may also work on other printers with a similar gantry plate.
The mount was made as a way of converting from a bowden setup to direct drive in the cheapest way possible while also being able to support a clone E3D V6 hotend paired with a clone BMG.
I recommend using ABS or PETG as PLA may warp with motor heat
This mount/setup has been tested and works with the Bullseye & Blokhead ducts
You may use the stock hardware with this mount however it recommended to extend the E-axis cable to retain the full height while printing.
Printing has been tested using PLA, PETG and TPU and all are printing well.
Donations are welcome !