Webcam Cover slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Webcam cover for your laptop. Scalable.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 541
- Wydruki
- 7
- Wyświetlenia
- 5159
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Webcam cover for your laptop or monitor. Slide it to the side to prevent being spies and slide it again to show your face to the rest of the meeting!
If it isn't long enough, edit it and extend it so microphone or status led is shown. If you have edited the model for a specific computer/monitor, feel free to upload it and give attribution to this webpage!
Paste it with hot glue to be able to remove it if needed or use hard/super glue. Don't use too much glue!
Print instructions
No supports, full infill, high resolution (0.06 mm is ok) to get straight faces. It's small so pay attention to bed adhesion.
Any material can be used, I printed it with PLA.
Like the material, any nozzle size is ok however try a small one! 0.4mm is perfect or less.
You may be wondering “does it fit my laptop?” I can't tell you. Sorry, there are so many laptops and now they have infrared sensors too in order to unlock without password. What's the solution? Easy! Scale it horizonatally to fit it over the distance between all cameras/mic/infrared. There is no need to make it as long as all cameras, maybe you can cover the mic led or off centered.
Modify it as you need!
Post a make or remix it specifying your laptop model so people can choose its version!