Slightly over-engineered Ender 3 (Pro) X axis pulley cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An X axis cover that gives space for a bigger pulley, incorporates a cable mount and allows a camera mount to fit.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I needed a new cover for my X axis pulley. I changed stepper motor and ended up with a taller pulley that interfered with the X end stop switch on the cover I was using.
With that in mind this cover had to accomplish a few things:
- Provide clearance between the pulley and the end stop switch.
- Mount the end stop switch in such a way that no modification to my printer would be needed.
- Mount with the original screws.
- Not be a completely plain box.
- Allow this camera mount to fit it: https://www.printables.com/model/199574-flexible-camera-mount-for-ender-3-pro
- Provide cable tie mounts to secure the wiring.
For print settings I recommend the lowest layer height you can, so the “Ender” text is readable, mine is printed at 0.12mm. Material shouldn't matter, I used eSun Orange PLA. You will need supports on for the cable tie mounts.
If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.
As always I've also included the .f3d and .step files in case anyone wants to modify it themselves.