1 / 2
Threaded Lens mount for Lomo RF-5 lens & Lens caps (incl. test pieces) — zdjęcie 1
1 / 2

Threaded Lens mount for Lomo RF-5 lens & Lens caps (incl. test pieces)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M72x1 threaded lens mount for a Lomo RF-5 (450mm f10) enlarging lens.

Ocena
0 / 5
Polubienia
7
Pobrania
25
Wydruki
0
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

This is a threaded mount for the Lomo RF-5 450mm f10 enlarging lens. The lens has an M72x1 thread but it's often sold without the mount. 

I've added a simple cup-like lens cap that fits both front and back of the lens (68mm dia.). 

Test pieces for both the mount and the lens cap are included

This model consists of:

  • Threaded lens mount for the RF-5 to screw into
    M72x1mm thread
    It's six mounting holes are on a 87mm circle
  • Lens caps. read an front are identical (68mm)
  • Test pieces for printing the correct thread size and the lens cap
    You most probably need to tweak the “Horizontal expansion” setting is you slicer software.
    When using Cura and a Neptune 2s I used -0,08 for the lens cap and -0,3 for the mount itself to compensate for the shrunken diameter.

Tagi