1 / 2
Threaded Lens mount for Lomo RF-5 lens & Lens caps (incl. test pieces)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M72x1 threaded lens mount for a Lomo RF-5 (450mm f10) enlarging lens.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a threaded mount for the Lomo RF-5 450mm f10 enlarging lens. The lens has an M72x1 thread but it's often sold without the mount.
I've added a simple cup-like lens cap that fits both front and back of the lens (68mm dia.).
Test pieces for both the mount and the lens cap are included
This model consists of:
- Threaded lens mount for the RF-5 to screw into
M72x1mm thread
It's six mounting holes are on a 87mm circle - Lens caps. read an front are identical (68mm)
- Test pieces for printing the correct thread size and the lens cap
You most probably need to tweak the “Horizontal expansion” setting is you slicer software.
When using Cura and a Neptune 2s I used -0,08 for the lens cap and -0,3 for the mount itself to compensate for the shrunken diameter.