HMG6-single-5015 with Incorporated LED Light Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a spot to mount some LEDS from a ws2812 light strip to illuminate the nozzle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the 'HMG6-single-5015.stl"
I've added an angled flat plate to allow the addition of some LED's to light up the nozzle.
It's designed to use the common ws2812 LED strip that can be cut to length. I used 2 LED's off a strip that has 60 LED's per meter. Gives plenty of light to observe the goings on at the nozzle. You could use a strip with more densely packed LED's if you so desire.
Wiring follows the same path as the heater and thermister cables.
You will need a Neopixel controller for this mod. Most printer control boards have them now.
Note: This duct does not have the best air flow properties. But its what we have for now. Hopefully a revised one will be released that directs more air behind the nozzle.
Enjoy!