Gearbox for Infento
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the printed part of the gearbox I created for my tractor using Infento. https://youtu.be/eDu6wyD1dPE Best…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
This is the printed part of the gearbox I created for my tractor using Infento.
Best print orientation as in STL.
Other material:
5x M6x16 DIN912
17x M6x20 DIN912
22x M6 locknut
2x M6 washer
4x bearing 6905ZZ
2x bearing 626ZZ
a spring
Infento components:
2x Toothed belt pulley 26T
2x Toothed belt pulley 46T
2x Toothed belt 100 T (or other 2x the same length)
(It's possible to modify the assembly to use different pulley sizes + belt tensioner)
Print resolution: 0.28mm on all, 0.2mm on shaft (for the best sliding effect it's best if the shaft and Clutch have different layer heights)
Infill: 30% is enough
Printed in PETG, but PLA should be also possible
Supports: touching build plate
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
30
Filament: generic PETG black & red
Category: Construction Toys