Gearbox for Infento
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the printed part of the gearbox I created for my tractor using Infento. https://youtu.be/eDu6wyD1dPE Best…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
This is the printed part of the gearbox I created for my tractor using Infento.
Best print orientation as in STL.
Other material:
5x M6x16 DIN912
17x M6x20 DIN912
22x M6 locknut
2x M6 washer
4x bearing 6905ZZ
2x bearing 626ZZ
a spring
Infento components:
2x Toothed belt pulley 26T
2x Toothed belt pulley 46T
2x Toothed belt 100 T (or other 2x the same length)
(It's possible to modify the assembly to use different pulley sizes + belt tensioner)
Print resolution: 0.28mm on all, 0.2mm on shaft (for the best sliding effect it's best if the shaft and Clutch have different layer heights)
Infill: 30% is enough
Printed in PETG, but PLA should be also possible
Supports: touching build plate
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
30
Filament: generic PETG black & red
Category: Construction Toys