1 / 3
80mm FAN RGB Halo Ring Upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade any 80mm FAN to RGB with some Transparent filament and an LED Stripe
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need to cut an LED Stripe to size and print the inner part with 1-2 walls in a mostly transparent filament. After this “upgrade” you will see an FPS boost of 20% at full RGB brightness.