Large Scrubber/Sponge Holder (With Slide)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't leave your scrubbers/sponges stinky and wet!
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 984
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Are your scrubbers always wet and dripping? Print this to help them dry out!
If you want a to print the basic version, please note that it will use more filament then V4 Beta. The Beta version doesn't need supports and costs less. This model is best if printed with a 0.6 nozzle as sliced! The time and settings for the print are for V3. Size as necessary but note that scaling the insert smaller may be a good choice. Please leave feedback if you think something should be added or changed! Thank You :)!
Description:
V3 Original design, needs support and cost more to print, (the pictures are of V3), overall works well!
V4 Beta Several changes have been made; fully covered bottom (so no supports are needed), an increased ramp vertical, thinner insert base, and folding flap (to hang over edge of sink)(Recommended)