Power BLough-R Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After purchasing the Power BLough-R kit from Brian Lough (https://www.tindie.com/products/brianlough/power-blough-r) I…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
After purchasing the Power BLough-R kit from Brian Lough (https://www.tindie.com/products/brianlough/power-blough-r) I found that there wasn't a case to house it securely. With that in mind, I took part of an afternoon and threw this together in Fusion 360.
This case can be used as a soldering jig to hold the board & USB ports while anchoring the ports to the board.
It was designed as a press fit case, so no screws are required and once assembled, it should hold relatively tight. For a more permanent case, simply apply glue to the inner lip of the cover before putting the top on.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Category: 3D Printer Accessories