Power BLough-R Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After purchasing the Power BLough-R kit from Brian Lough (https://www.tindie.com/products/brianlough/power-blough-r) I…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 1
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
After purchasing the Power BLough-R kit from Brian Lough (https://www.tindie.com/products/brianlough/power-blough-r) I found that there wasn't a case to house it securely. With that in mind, I took part of an afternoon and threw this together in Fusion 360.
This case can be used as a soldering jig to hold the board & USB ports while anchoring the ports to the board.
It was designed as a press fit case, so no screws are required and once assembled, it should hold relatively tight. For a more permanent case, simply apply glue to the inner lip of the cover before putting the top on.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Category: 3D Printer Accessories