101Hero LCD20x4 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the LCD2004 panel printable by the 101Hero. Thanks to RenatoT for the knob and BrantPeery for the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a case for the LCD2004 panel printable by the 101Hero. Thanks to RenatoT for the knob and BrantPeery for the base model for the shell.
Print Settings
Printer:
101Hero
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.18mm
Infill:
10% or higher (or 0% w/ 3+ solid wall layers)
Notes:
Print all 3 pieces of the shell, assemble by placing small pins into the matching front center piece sockets and alternate tabs to insert back panel. (See complete v2 STL for a pictoral view)
Use 6 M3x6 screws to attach the board to the shell.Center pieces can be repositioned for shorter travel paths. They were not moved after cutting away the sides.
Category: 3D Printer Accessories