Electric Pencil Sharpener Replacement Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,36 € – 0,44 € netto (bez VAT)
Dla pliku: coverV2_0.3mm_PLA_MK3S_24m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,40 € netto (środek widełek).
- Masa podana przez autora
- 5 g
- Czas druku podany przez autora
- 24 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it anyways. This is one of those.
I bought this nice battery powered pencil sharpener at Goodwill and it didn't have a cover. It didn't take a lot to figure out that there was some kind of easy-to-lose cover that went over the sharpening mechanism, so I calipered it and drafted a replacement.
I tried to design it so that it could be printed without any support - but I had better luck printing with external support applied.
This may be delusional talk, but hopefully, this posting brings a few of them with missing covers back to life.
If you found this useful, it would bring me great joy to see your work - so be sure to share. :)
Or, just buy me a coffee:
https://www.buymeacoffee.com/Julius3E8
OR… better yet, please feel free to dump a bitcoin or two here:
1Py3TUeR8noBN2giHyFV1GfB6x3Kh2WEVv
... include a note to the effect of "Hi Julius3E8, thanks for the [insert name of thing]... my life has improved five-fold on account of it and please accept this paltry amount in gratitude".
You're welcome! (in advance) :D
Also, feel free to peruse my other submissions which are almost as varied as they are many:
https://www.printables.com/social/320993-julius3e8/models
http://www.thingiverse.com/Julius3E8/designs
Enjoy!
July 27th, 2024 update: Added a second version (coverV2.stl) that actually holds down the interlock switch better than the first one. Also, it is a better snap in that locks it securely in place. It's oriented to be printed without support, but if you print it with support re-oriented by 90 degrees, then the filament will give it extra strength.