Electric Pencil Sharpener Replacement Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.44 net (excluding VAT)
For file: coverV2_0.3mm_PLA_MK3S_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it anyways. This is one of those.
I bought this nice battery powered pencil sharpener at Goodwill and it didn't have a cover. It didn't take a lot to figure out that there was some kind of easy-to-lose cover that went over the sharpening mechanism, so I calipered it and drafted a replacement.
I tried to design it so that it could be printed without any support - but I had better luck printing with external support applied.
This may be delusional talk, but hopefully, this posting brings a few of them with missing covers back to life.
If you found this useful, it would bring me great joy to see your work - so be sure to share. :)
Or, just buy me a coffee:
https://www.buymeacoffee.com/Julius3E8
OR… better yet, please feel free to dump a bitcoin or two here:
1Py3TUeR8noBN2giHyFV1GfB6x3Kh2WEVv
... include a note to the effect of "Hi Julius3E8, thanks for the [insert name of thing]... my life has improved five-fold on account of it and please accept this paltry amount in gratitude".
You're welcome! (in advance) :D
Also, feel free to peruse my other submissions which are almost as varied as they are many:
https://www.printables.com/social/320993-julius3e8/models
http://www.thingiverse.com/Julius3E8/designs
Enjoy!
July 27th, 2024 update: Added a second version (coverV2.stl) that actually holds down the interlock switch better than the first one. Also, it is a better snap in that locks it securely in place. It's oriented to be printed without support, but if you print it with support re-oriented by 90 degrees, then the filament will give it extra strength.