Wingspan Card Box w/ Magnetic Lid (Split for Mini+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Drakka01's Wingspan Card Box, split to print in pieces on a Prusa Mini (with alignment slots).
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 514
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- BSD License
This is a remix of Drakka01's Wingspan Card Box, split so as to be able to print on a Prusa Mini.
I experimented with two different slot types for alignment when gluing the parts together. The bottom part uses two rectangular slots while the lid uses two rod type slots.
According to the original, the magnets used are 6x3mm and the card slots do not accommodate card sleeves, but does hold the Base game + European + Oceanic expansions.
I used super glue to stick the two parts together, though only time will tell how long that will hold up.
I printed with 0.2mm layers using Overture Digital Blue PLA.
Supports: the lid will need supports for the rod. In the future I may switch this to a rectangle type like the card box bottom so as to not require supports.