Bitsetter Nulleinsteller 50mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crude test for creating a 3D printed bitsetter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
I have access to a CNC-Mill at my university, but they lack a bitsetter for setting the tool height. So I thought let's try and create one on my 3D printer. Since I don't need a micrometer precision, this should be enough for setting all tools to an equal height.
The design can probably be improved upon a lot and I might do so in the future, for now im quite happy with it though. It does it's job.
For printing i suggest to go for
- 0.2mm layer height
- 0.4mm nozzle
- avoid crossing perimeters
- seam position aligned
- PLA works just fine, PETG if you wan't long lasting springiness (shouldn't really make a diff.)
Tip: Do a color change on the last 2 Layers so theres more contrast on the alignment cutouts.
PS.: You also can check your nozzle to bed distance with the device, still it's more an estimation than a measurement.