GIRO.HUE - Fugato Wired Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this bracket you are able to directly plug any Philips Hue Fugato into a power plug. A strain relief is included!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRO.HUE - Fugato Wired Wall Mount
General
This bracket was designed to mount the Philips Hue Fugato Single Lamp onto a wall without the opportunity of having a wire coming out of that wall. With this option you can directly wire the Philips Hue Fugato into a wall plug. The mount comes with a strain relief to ensure that the live wire will not disconnect from the lamp and cause harmful situations.
Be aware that working with mains voltage can cause serious injuries! If you use that bracket and you don't know how to protect your home circuit and how the wires have to be connected properly, then please don't use that bracket! Use at your own risk!
You will need additional screws, nuts and washers for the mounting of bracket. The needed parts are mentioned below.
Additional screws, nuts and washers per bracket
2x Screws (Maximum Diameter 4mm)
2x Anchors (If necessary)
Printing
I would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with 100% Infill.
Firmware adjustments
No Firmware Adjustments needed.
Additional Information
Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
