Cheekymandos - Blue Laser Tank (B.L.T.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uploading my "back catalog" to Prusa Printers!
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018:
The Cheekymandos are back in Series 2: Rise of Blue Laser! Download the files to make your very own B.L.T.
Full parts list and DIY instructions at https://dragonmountaindesign.com/2018/06/13/cheekymandos-blue-laser-tank-b-l-t/
See it in action: https://youtu.be/9oklp5QrT38
Files for the missile launchers can be found at: https://www.prusaprinters.org/prints/24697-cheekymandos-missile-action-playset
Print instructions
BLT-Body
Material: PLA
Infill: 15% to 20%
Supports: Recommended. I tried the part with and without. The one that had supports turned out a bit nicer on the tread-track mating features.
Brim: Yes. I found that it helped keep all the corners and edges nice and flat.
BLT-Cockpit
Material: PLA
Infill: 20%
Supports: Yes. Decent amount of overhang is present.
Brim: Yes.
BLT-RightTreadTrack / BLT-LeftTreadTrack
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.
BLT-BearingPin (x6)
Material: PLA
Infill: 20%
Supports: No.
Brim: No.
BLT-FauxBearing (x6 OPTIONAL)
Material: PLA
Infill: 20%
Supports: No.
Brim: No.
BLT-MissileMount
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.
BLT-Canopy
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.
BLT-Tread (x2)
Material: NinjaFlex SemiFlex (Flex98A)
Infill: 20%
Supports: No.
Brim: No.