Cheekymandos - Blue Laser Tank (B.L.T.)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uploading my "back catalog" to Prusa Printers!
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 54
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018:
The Cheekymandos are back in Series 2: Rise of Blue Laser! Download the files to make your very own B.L.T.
Full parts list and DIY instructions at https://dragonmountaindesign.com/2018/06/13/cheekymandos-blue-laser-tank-b-l-t/
See it in action: https://youtu.be/9oklp5QrT38
Files for the missile launchers can be found at: https://www.prusaprinters.org/prints/24697-cheekymandos-missile-action-playset
Print instructions
BLT-Body
Material: PLA
Infill: 15% to 20%
Supports: Recommended. I tried the part with and without. The one that had supports turned out a bit nicer on the tread-track mating features.
Brim: Yes. I found that it helped keep all the corners and edges nice and flat.
BLT-Cockpit
Material: PLA
Infill: 20%
Supports: Yes. Decent amount of overhang is present.
Brim: Yes.
BLT-RightTreadTrack / BLT-LeftTreadTrack
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.
BLT-BearingPin (x6)
Material: PLA
Infill: 20%
Supports: No.
Brim: No.
BLT-FauxBearing (x6 OPTIONAL)
Material: PLA
Infill: 20%
Supports: No.
Brim: No.
BLT-MissileMount
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.
BLT-Canopy
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.
BLT-Tread (x2)
Material: NinjaFlex SemiFlex (Flex98A)
Infill: 20%
Supports: No.
Brim: No.