1 / 1
Better Prusa MINI Y Plate Rear R7 -> R7.1 — zdjęcie 1

Better Prusa MINI Y Plate Rear R7 -> R7.1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

makes the small printer more robust😋

Ocena
0 / 5
Polubienia
19
Pobrania
132
Wydruki
0
Wyświetlenia
570
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

printing:

Profil: 0.20mm QUALITY or SPEED

filament: PETG

infill: honeycomb at 50% 

outside culture: 4

on a prusa mini or MK3/S/+

 

what is better about it?

1. screw holes 8 instead of 4, like the MK3 /S/+ prevents the Y bed from bending during transport or the printer being moved. inner diameter from 5.60mm to 5.00mm. 

!!!please screw the screws all the way through before assembly!!!

2. space was left between the bed and the Plate Rear at the engine mount. for the MK3 bed. mod (spacer as fromMK3)

3. the space In between the rod guide has been removed. for better strength and less wiggle room.

!!!Tip Use a rubber mallet!!!

4. Version v1.1 : has cable tie support for the rod guide, for more flexibility when you have to maintain the rods.

Tagi