Jeweler's Saw Blade Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jeweler's saw blades are delicate little things. Easily broken or mixed up. This case provides a rigid enclosure to…
- Ocena
- 4,5 / 5
- Polubienia
- 11
- Pobrania
- 117
- Wydruki
- 2
- Wyświetlenia
- 711
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Jeweler's saw blades are delicate little things. Easily broken or mixed up.
This case provides a rigid enclosure to keep your blades organized and safe.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
.2mm layer
Infill:
20%
Notes:
Prints without supports. Because it is a flat piece, a brim is recommended.
Snaps together well in PLA, have not tried other materials yet.
The rigidity of the case is mostly determined by the top/bottom and perimeter thickness.
I printed mine with 3 perimeters (walls) and 4 top/bottom layers.
Post-Printing
Assembly is simply snapping the cap on the case.
Note: If you have any drooping or over-extrusion on the little "bumps" on the case side of the hinge, sand them down slightly to allow everything to fit.
Category: Tool Holders & Boxes