Jeweler's Saw Blade Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jeweler's saw blades are delicate little things. Easily broken or mixed up. This case provides a rigid enclosure to…
- Rating
- 4.5 / 5
- Likes
- 11
- Downloads
- 117
- Makes
- 2
- Views
- 716
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jeweler's saw blades are delicate little things. Easily broken or mixed up.
This case provides a rigid enclosure to keep your blades organized and safe.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
.2mm layer
Infill:
20%
Notes:
Prints without supports. Because it is a flat piece, a brim is recommended.
Snaps together well in PLA, have not tried other materials yet.
The rigidity of the case is mostly determined by the top/bottom and perimeter thickness.
I printed mine with 3 perimeters (walls) and 4 top/bottom layers.
Post-Printing
Assembly is simply snapping the cap on the case.
Note: If you have any drooping or over-extrusion on the little "bumps" on the case side of the hinge, sand them down slightly to allow everything to fit.
Category: Tool Holders & Boxes