Fence Post Solar Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fence post solar light for a standard 50mm x 50mm fence post, at least standard here in Australia.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a fence post solar light for a standard 50mm x 50mm fence post, at least standard here in Australia.
Print instructions
I made a short assembly video on youtube.
This is for use with a cheap 48mm diameter, 30mm tall garden solar light.
Optional are mirror tile wall tile sticker cut to 52mmX84mm and circle with outer diameter of 45mm and inner diameter of 10mm, these will increase brightness of the lamp a little bit.
Best printed with PETG.
All files can be printed without supports.
All files functional at 200 micron layer height except for the middle file.
For best result, I suggest slicing the middle file with Simplify3D as follows:
First process 200 micron, stop printing at 4mm
Second process at 350 micron, extrusion multiplier at 1.00, extrusion width at 1.00, VASE MODE, start printing at 4mm, finish printing at 46mm, zero top and bottom layers
Third process at 200 micron, start printing at 46mm
This middle file can be sliced with prusaslicer with a modifier from 4mm to 46mm, set to zero infill, zero top and bottom layers, 1-2 perimeters.