XMAX Starry Tool (Pokey Stick) Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got frustrated by the fact that there's no simple way to bring the pokey stick ("tool") along with the handy heater.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I got frustrated by the fact that there's no simple way to bring the pokey stick ("tool") along with the handy heater.
This holder attaches to the bottom of the device, allowing you to "click" the stick into place.
The model has been size-adjusted to fit the real-world object as rigidly as possible, while still allowing you to remove it for when you need to replace the battery.
If it's too loose, I suggest simply placing some electric tape or similar inside the print.
Included are:
- Blender file with multiple revisions (ideal size vs real-world size, etc)
- STL file of the size-fit version
I unfortunately do not have the print settings anymore.
I can however tell you that I printed this with PLA on a Prusa i3 mk3.
The print settings wereprobably along these lines: 0.10mm layer height, no supports, 20% infill. You want reasonably small layers as the precision is quite high on the "click" part.
Category: Parts